Home > Products > Ball Bearing > Deep Groove Ball Bearing > Deep Groove Ball Bearing 6034 MB

Deep Groove Ball Bearing 6034 MB

    Payment Type: L/C,T/T,D/P
    Incoterm: FOB,CIF

Basic Info

Model No.6034 MB

BrandNXZ

Additional Info

PackagingStandard export package

TransportationOcean,Land,Air

Place of OriginChina

CertificateISO9001;ISO14001;TS16949

HS Code8482102000

PortYinchuan,Shanghai,Tianjin

Payment TypeL/C,T/T,D/P

IncotermFOB,CIF

Product Description

Deep Groove Ball Bearing


Deep groove Ball Bearings are with the characteristics of simply designed structures; low friction coefficient and high limit rotational speed. Their range of application is very wide. They can mainly carry radial load and certain thrust load. When the radial internal clearance increased, the bearings have the functions of angular contact ball bearings that a larger thrust load can also be carried.

Structures

1. Basic type 60000

Applications of this type of Bearing can be found in situations where there are no special requirements for mounting and sealing.

2. With one shield (-Z) on one side or two shields (-2Z) on both sides.

   The shields are made of steel sheet. Adequate lubricating grease has been put in the deep groove ball bearings with two shields during assembling process and there is no need to clean the bearing or add lubricant as mounting. It is noncontact seal, and compared with deep groove ball bearings with seals, they have less friction and suitable for applications with high rotational speed requirement.

3. With one seal(-RS)on one side or two seals(-2RS)on both sides

The seals are made of rubber with steel sheet reinforcement. It is contact sealing that could seal much better but have high friction and low limit rotation speed if the seals contact with the outside of the inner ring; while it is non-contact sealing that has the same limit rotation speed as the basic type. The lubricant has been prefilled in the bearing with seals both sides, so there is no need to clean and fill the lubricant as mounting.

With snap ring groove on the outer ring (-N)

   The snap ring can be used to locate the bearing in the axial direction so that the mounting in the housing is simplified.

Cage material

   Deep groove ball bearings generally use pressed steel cages or solid cages. Phenol resin cage is suitable for application with high limit rotational speed.

Permissible Tilt Angle

Deep groove ball bearings permit tilting angle between the inner ring and outer ring. The details are listed in the Table 1.

Tolerance and Clearance  

The tolerance of deep groove ball bearings is P0 basically. P5, P6, P4 and P2 are available for different application.

The radial internal clearance of deep groove Ball Bearing is as Table 3.

Dynamic equivalent radial load

Fr-Radial load (kN)

Fa-Axial load (kN)

X-Radial factor

Y-Axial factor

X and Y values see Table below.

Static equivalent radial load

     P0r=Fr[kN]                  

     P0r=0.6Fr+0.5Fa[kN]        

Other products from this company»
  • Deep Groove Ball Bearing

Product Categories : Ball Bearing > Deep Groove Ball Bearing

Product Images

  • Deep Groove Ball Bearing 6034 MB
  • Deep Groove Ball Bearing 6034 MB
  • Deep Groove Ball Bearing 6034 MB
  • Deep Groove Ball Bearing 6034 MB
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
Jane Li Ms. Jane Li
What can I do for you?
Contact Supplier